Epson BrightLink 695Wi DuoLink Setup Guide - Page 21
Brightness Settings, Light Source Mode, Normal, Multi-Projection, Power Consumption, Light
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
• For laser models, select Brightness Settings > Light Source Mode > Normal and press Esc. Note: If you have set Multi-Projection to On, you cannot change the Power Consumption or Light Source Mode setting. 5. Select the Extended menu and press Enter. 6. Select the Multi-Projection setting and press Enter. 21
21
• For laser models, select
Brightness Settings
>
Light Source Mode
>
Normal
and press
Esc
.
Note:
If you have set
Multi-Projection
to
On
, you cannot change the
Power Consumption
or
Light
Source Mode
setting.
5.
Select the
Extended
menu and press
Enter
.
6.
Select the
Multi-Projection
setting and press
Enter
.