Epson BrightLink 695Wi DuoLink Setup Guide - Page 29
Auto Calibration, Enter, A pattern appears then disappears
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Select Auto Calibration and press Enter. You see this screen: 4. Adjust the image focus, if necessary. 5. Press Enter to select Yes. A pattern appears then disappears, and the system is calibrated. If you see a message that calibration failed, you need to calibrate manually. The cursor location and pen position should match after calibration. If not, you may need to calibrate manually. 29
29
3.
Select
Auto Calibration
and press
Enter
.
You see this screen:
4.
Adjust the image focus, if necessary.
5.
Press
Enter
to select
Yes
.
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.