Epson BrightLink 695Wi DuoLink Setup Guide - Page 27
Pen Calibration, Calibrating Automatically - touch calibration
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Pen Calibration Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate the first time you use your projector's interactive features. Calibration results remain until you calibrate again. Be sure to calibrate the pen before performing finger touch calibration. If you notice positioning discrepancies after doing any of the following, calibrate again: • Performing Geometry Correction • Adjusting the image size • Using the Image Shift feature • Moving the projector Note: When using multiple projectors with DuoLink, draw a line across the two screens after pen calibration and make sure the screens are aligned correctly. If the line position does not match, realign the screens and perform calibration again. Note: Move any pen you are not using away from the projection screen while calibrating. Calibrating Automatically Calibrating Manually Parent topic: Configuring Projector Settings for Multiple Projectors Calibrating Automatically You do not need the pens or a computer for Auto Calibration. Make sure the other projector is turned off during calibration. Make sure you have aligned the screens before starting calibration. Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing the Menu button on the remote control as described here. 27