Epson BrightLink 695Wi DuoLink Setup Guide - Page 33
Calibrating for Finger Touch Interactivity, Parent topic
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column. Note: If you make a mistake, press the Esc button on the remote control to go back to the previous circle. To restart the calibration process, press and hold the Esc button for 2 seconds. 8. Continue until all of the circles disappear. Parent topic: Pen Calibration Calibrating for Finger Touch Interactivity Finger touch calibration coordinates the position of your finger with the location of the cursor. Turn off the other projector while performing touch calibration. Make sure you have calibrated the pens, installed the Touch Unit, performed angle adjustment, and turned on the Touch Unit before calibrating for finger touch interactivity. Note: The BrightLink 685Wi and BrightLink 685Wi+ do not support finger touch. 33