Epson BrightLink 695Wi DuoLink Setup Guide - Page 20

Adjusting the Projector's Brightness Level, Enter, Green, Parent topic, Power Consumption, Normal

Get Epson BrightLink 695Wi PDF manuals and user guides View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

8. Select the area you want to adjust and press Enter. 9. Select Red, Green, or Blue and press the left arrow button to weaken the color tone or the right arrow button to strengthen the color tone. Note: The adjustment screen changes each time you press Enter. 10. Press Esc to return to the area selection screen. 11. Repeat steps 8 through 10 for each area, then select All to adjust the entire screen. 12. Press Esc to exit the menus. Parent topic: Matching Images for Multiple Projectors Adjusting the Projector's Brightness Level When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are equally bright. (Even after adjusting the brightness levels, the brightness of each projector may not match exactly.) 1. Turn on all the projectors and display the same image. 2. Press the Menu button. 3. Select the ECO menu and press Enter. 4. Do one of the following: • Select Power Consumption > Normal and press Esc. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
20
8.
Select the area you want to adjust and press
Enter
.
9.
Select
Red
,
Green
, or
Blue
and press the left arrow button to weaken the color tone or the right
arrow button to strengthen the color tone.
Note:
The adjustment screen changes each time you press
Enter
.
10. Press
Esc
to return to the area selection screen.
11. Repeat steps 8 through 10 for each area, then select
All
to adjust the entire screen.
12. Press
Esc
to exit the menus.
Parent topic:
Matching Images for Multiple Projectors
Adjusting the Projector's Brightness Level
When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are
equally bright. (Even after adjusting the brightness levels, the brightness of each projector may not
match exactly.)
1.
Turn on all the projectors and display the same image.
2.
Press the
Menu
button.
3.
Select the
ECO
menu and press
Enter
.
4.
Do one of the following:
• Select
Power Consumption
>
Normal
and press
Esc
.