Epson BrightLink Pro 1450Ui Users Guide - Page 232

• Always apply password lets you require that whiteboard files must be saved as passwordprotected PDF or EWF files. • CIFS Server lets you set the CIFS server's IP address or fully qualified domain name (FQDN). You can enter up to 63 alphanumeric characters. Note: You cannot use the following characters or spaces. If you need to enter more characters, enter them using the Web Config utility. To use a FQDN, you must configure a DNS server. Enter a port number by adding it after the address or name and separating it with a colon, for example, FQDN:port_number or IP_address:port_number. You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to 255.255.255.255. • Shared Folder Path lets you enter the network folder name in this format: share_name\folder_name. You can enter up to 63 alphanumeric characters. You cannot use the following characters or |. • User name lets you enter a user name with read/write privileges on the network folder. You can enter up to 64 alphanumeric characters. You can enter a domain name by adding it before the user name and separating them with a backslash in this format: domain\username. • Password lets you enter a password for the user name you entered. You can enter up to 64 alphanumeric characters. After you enter the password and select Setup complete, the password is hidden. • Check Connection lets you test the network connection. Note: Use the displayed keyboard to enter the address, user name, and password if necessary. Press the arrow buttons on the remote control to highlight numbers and press Enter to select them. 6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Selecting Whiteboard Settings Selecting Settings for Emailing Whiteboard Pages You can select the settings for emailing whiteboard pages from the projector. 1. Press the Menu button on the remote control. 232