Epson BrightLink Pro 1450Ui Users Guide - Page 234

• Default e-mail address lets you enter an optional address for testing. You can enter up to 64 alphanumeric characters. Do not use spaces or the following symbols • Disallow Address Input controls whether you can enter email addresses manually. When enabled, you can only choose email addresses from an address book or directory service. • SMTP Server lets you enter the IP address or host name for the mail server. You can enter up to 63 alphanumeric characters. If you specify a host name, you must configure a DNS server. Do not use spaces or the following symbols Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to 255.255.255.255. • Authentication lets you set the type of authentication expected by the mail server • Port Number lets you enter a port number for the SMTP server. The default port is 25 when set to Open, 465 for SSL, and 587 for TLS. • User name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric characters. Do not use a colon (":") or spaces. • Password lets you enter a password for the mail server. You can enter up to 64 alphanumeric characters. Do not use a colon (":") or spaces. • Send a test e-mail lets you connect to the SMTP server and send a test email to the address you set as the default. Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote control to highlight numbers or characters and press Enter to select them. 6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Selecting Whiteboard Settings Selecting Settings for a Directory Server You can select the settings for specifying a email directory server for your projector. 1. Press the Menu button on the remote control. 234