Epson BrightLink Pro 1450Ui Users Guide - Page 341
Solutions When Network Alert E-Mails are Not Received
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make sure the projector is turned on and connected to the network correctly. (If an error shut down the projector, it cannot send an e-mail.) • Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu or in the network software. • Set the Standby Mode setting to Communication On so the network software can monitor the projector in standby mode. Parent topic: Solving Network Problems Related references Network Projector E-mail Alert Messages Related tasks Setting Up Projector Network E-Mail Alerts Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive. Note: You cannot change the user ID. • To display the Web Control screen, enter EPSONWEB as the user ID, and enter the password set in the projector's Network menu as the password. The default password is admin. • To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password set in the projector's Network menu as the password. The default password is guest. • Make sure you have access to the network the projector is on. Note: The user ID and password are case sensitive. Parent topic: Solving Network Problems 341