Epson BrightLink Pro 1450Ui Users Guide - Page 333
Solutions When Only a Partial Image Appears, Projector Info, Parent topic, Related references
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.) • As a test, try setting the computer's display resolution to the lowest possible setting, and then gradually increase it as necessary. • Check the input resolution under Projector Info in the Info menu and make sure that the projector supports that resolution. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Make sure the Resolution setting in the Signal menu is set correctly to for the input signal. • Try adjusting the image position using the Position menu setting. • Press the Aspect button on the remote control to select a different image aspect ratio. • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a full display. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) • Make sure you selected the correct Projection setting. • Try adjusting the image position using the Image Shift setting. • If you are passing the video signal through another device, make sure the device is set up correctly, then try connecting the video source directly to the projector. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Related tasks Zooming Into and Out of Images Changing the Image Aspect Ratio 333