Epson BrightLink Pro 1450Ui Users Guide - Page 342
Solutions When the Image Contains Static During Network Projection
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
Solutions When the Image Contains Static During Network Projection If the projected image contains static during network projection, try the following solutions: • Check for any obstacles between the access point, the computer, the mobile device, and the projector. If necessary, change their positions to improve communication. Also, make sure that they are not too far apart. Move them closer together and try to connect again. • If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth. • If the connection speed declines, reduce the number of connected devices. Parent topic: Solving Network Problems Solutions When You Cannot Connect Using Screen Mirroring If you are unable to connect to the projector using Screen Mirroring (BrightLink Pro 1460Ui), try the following solutions: • SelectOn as the Screen Mirroring setting in the projector's Network menu. • Make sure the Display Name setting does not contain a dash ("-") or it may not be displayed correctly on the mobile device. • Select Off as the Screen Mirroring setting, then select On again. • Make sure no other mobile device is connected to the projector. • Make sure the mobile device settings are correct and restart the device. • You may not be able to connect immediately after disconnecting from the projector. Wait a while and try connecting again. • If you have previously connected to the projector using Screen Mirroring, the device may have saved the previous connection information. Delete the saved information and connect to the projector from the list of available devices. Parent topic: Solving Network Problems Solutions When the Image or Sound Contains Static When Using Screen Mirroring If the projected image or sound contains static when connecting using Screen Mirroring, try the following solutions: • Avoid covering the Wi-Fi antenna of the mobile device. 342