Epson BrightLink Pro 1450Ui Installation Guide - Control Pad and Touch Unit - Page 10
English
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Cable routing holes When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole. Otherwise, remove the cable cover ( ) and route the cables through the opening. Route the printer cable along the groove on the back of the Control Pad. Pen stand external dimensions and weight The pen stand weighs approximately 3.3 ounces (93 g). 4.0 in (101.9 mm) 1.1 in (28.8 mm) 1.7 in (44.4 mm) 1.1 in (28.8 mm) 3.9 in (99.9 mm) 2.8 in (70 mm) 1.4 in (35.5 mm) 1.4 in (36 mm) 9
9
English
Cable routing holes
When routing cables through a wall, use the position (
) in the following figure as the cable routing hole.
Otherwise, remove the cable cover (
) and route the cables through the opening. Route the printer cable
along the groove on the back of the Control Pad.
Pen stand external dimensions and weight
The pen stand weighs approximately 3.3 ounces (93 g).
4.0 in (101.9 mm)
1.7 in
(44.4 mm)
1.4 in
(35.5 mm)
2.8 in (70 mm)
1.4 in
(36 mm)
3.9 in (99.9 mm)
1.1 in
(28.8 mm)
1.1 in
(28.8 mm)