Epson BrightLink Pro 1450Ui Installation Guide - Control Pad and Touch Unit - Page 12
Installing the Touch Unit above a whiteboard
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Installing the Touch Unit above a whiteboard Follow the steps below to use the Touch Unit Bracket to install the Touch Unit above the frame of a whiteboard. Some menus may differ slightly from the illustrations, but the installation instructions are the same. Install the Touch Unit Bracket on a flat, smooth, unwarped surface. If there is unevenness on the screen surface of more than 0.2 inch(5 mm) in any direction, your fingers may not be detected and finger touch operations may not be performed correctly. A Turn on the projector Remote Control Control Panel B Display the installation pattern 1. Press the Menu button on the remote control or the projector control panel. Remote Control Control Panel 2. Select Easy Interactive Function from the Extended menu. 3. Select Touch Unit Setup. 11