Epson BrightLink Pro 1450Ui Installation Guide - Control Pad and Touch Unit - Page 27
Attach cover
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
17. If there is an obstacle that cannot be removed, such as a whiteboard tray or frame, remove the tape from the back of the supplied infrared deflectors and stick them to the screen so that the laser is not reflected by the obstacle. Make sure to stick the deflectors between the dots and the obstacle and use as many deflectors as necessary to match the width of the dots. ❏ Do not remove an infrared deflector once it has been stuck in place. ❏ Do not stick tape or place anything on the infrared deflectors. The deflectors will not function properly if anything is placed on them. After placing the infrared deflectors, press the or button on the remote control, and then repeat step 12. If the dots do not disappear even after attaching the infrared deflectors, select Additional Adjustments and follow the instructions. If the dots do not disappear even after performing the above procedures, contact Epson. 18. Perform touch calibration by pressing Menu on the remote control. On the Extended menu, select Easy Interactive Function, then Touch Unit Setup. Select Touch Calibration and follow the instructions. H Attach cover Attach the dial cover. Make sure to tighten the screw at the bottom of the cover. 26