Epson LQ 670 Product Information Guide - Page 6
Buttons, EPSON Remote! utility. - print head
View all Epson LQ 670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
EPSON LQ-670 Pause (orange) On when the printer is not ready to print data, paper is out or jammed, or you press the Pause button to pause printing. Flashes when the printer is in micro-adjust mode or the print head is too hot. Font (three lights, green) The printer uses the three Font lights to indicate the selected font as follows: o o n o n o o n n n o o n o n n n o n n n Draft Roman Sans Serif Courier Prestige Script Others* n = On, o = Off * This light pattern means that a font other than those indicated on the control panel has been selected using the default-setting mode or the EPSON Remote! utility. (The fonts available in the default-setting mode or EPSON Remote! are: OCR-B, Orator, Orator-S, Script C, Roman T, or Sans Serif H.) Condensed (green) On when you press the Condensed button to print condensed characters. Tear Off/Bin (two lights, green) The printer uses the two Tear Off/Bin lights to indicate the following: f f The perforation of your continuous paper is at the tear-off position. o n The optional high-capacity cut-sheet feeder (bin 1 of the double-bin feeder) is selected. n o The optional second-bin cut-sheet feeder (bin 2 of the double-bin feeder) is selected. n n Card mode is selected (for printing on postcards). f = Flashing, n = On, o = Off Buttons Operate Press this button to turn the printer on or off. Pause Press this button to temporarily stop printing, and press it again to resume printing. To turn on the micro-adjust mode, stop printing and hold down this button for at least 3 seconds. Press it again to turn off the micro-adjust mode. Load/Eject Press this button to advance single-sheet or continuous paper to the loading position. (The printer normally loads paper automatically.) If a single sheet is already in the loading position, press this button to eject it. If continuous paper is in the loading or tear-off position, press this button to feed it backward to the standby position.This button also executes micro-adjust mode LF/FF (line feed/form feed) Press this button briefly to feed the paper forward one line. Hold it down to eject a single sheet or advance continuous paper to the top of the next page. You can also use this button to load a single sheet of paper from the optional cut-sheet feeder or to feed continuous paper from the standby position to the loading position. This button also executes micro-adjust mode. Font Press this button to select one of the following fonts: Draft, Roman, Sans Serif, Courier, Prestige, Script, or Others. Others means a font other than those indicated on the control panel has been selected using the default-setting mode or the EPSON Remote! utility. Printing with the Draft font requires fewer dots per character, which significantly increases the printing speed. However, printing with this font also reduces print quality. When you need letter-quality printing, select a font other than Draft. Note: The typestyle samples on the control panel are meant as guides only; printed results may differ slightly. Condensed Alternates between condensed characters and normal characters. Tear Off/Bin Press this button to move continuous paper to the tear-off position. Press it again to move the next page to the top-ofform position. When the optional cut-sheet feeder is installed, press this button to select the cut-sheet feeder bin you want to use. Select Bin 1 to use the high-capacity cut-sheet feeder, and select Bin 1 or Bin 2 to use the double-bin cut-sheet feeder. To print on postcards, select Card mode by pressing this button until both Tear Off/Bin lights are on. (Card mode is available only when the paper thickness lever is set to "2" or higher on the scale.) 6 - EPSON LQ-670 3/97