Epson PictureMate Show - PM 300 User's Guide - Page 31
Printer ID, Communication Mode, Discoverable, Pairing, Encryption, and send print jobs.
View all Epson PictureMate Show - PM 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
You see a screen like the following: The passkey is required if your Bluetooth Communication Mode is set to Pairing, or if Encryption is enabled. 6 Press u or d to change the first digit, then press r to move to the second digit. 7 Repeat step 7 until you have entered a 4-digit number to use as your Bluetooth Passkey. Then press OK. 8 At the confirmation screen, press OK again. 9 Choose options for each of the settings listed on the right. Press OK to save the option and move to the next setting. ● Printer ID If multiple Bluetooth-enabled printers are in the same communication range, you can distinguish them by assigning each a unique number (from 0 through 9). Turn PictureMate off and then back on when you're finished. ● Communication Mode Select Discoverable to allow Bluetoothenabled devices to freely discover PictureMate and send print jobs. Select Not Discoverable to prevent unknown devices from discovering the printer. To print in this mode, first search for PictureMate in Discoverable mode. After that, you will be able to print using this mode. Select Pairing to require that a four-digit Passkey be entered into a device before it can print from PictureMate. ● Encryption Select On to encrypt communication and require that a four-digit Passkey be entered into a device before it can print. 31