Fisher and Paykel OR30SDG4X1 User Guide - Page 10
First Use
View all Fisher and Paykel OR30SDG4X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Control panel layout FIRST USE Dials may vary Oven controls Cooktop burner controls Condition the oven It is important to condition your oven before using it for cooking and baking. Conditioning will burn off any manufacturing residues and ensure that you get the best results right from the start. Before you start: ● Make sure you have removed all packaging and any cable ties used to secure the shelving during transit. ● Make sure all shelves are fitted in the oven. ● Make sure all oven control dials are turned to O (OFF). 1 Open the oven door fully. 8 2 In the O (OFF) position push the BAKE & BROIL dial in as far it will go then turn counterclockwise to BAKE. ● Check the lower burner to see if it has lit. When the burner is lit you will see blue flames through the cover in the base of the oven. visible flame ● The igniter will continue to spark for a few seconds after the burner is lit. This is normal. ● If the burner does not light turn the dial back to OFF and try again.