Fisher and Paykel OR30SDG4X1 User Guide - Page 35

CARE AND CLEANING WHAT? HOW OFTEN? HOW? COOKTOP PARTS Burner caps and flame spreaders 1 Check that the burner is turned OFF and allow it to cool. 2 Lift off the burner cap and brass flame spreader. 3 Wash them in hot soapy water, rinse, and dry. ● Use a stiff nylon brush or straightended paper clip to clear the notches of the flame spreader. 4 Replace the flame spreader and burner cap correctly. See 'Replacing the burner parts'. Ignitors Burner grates Wok ring 1 Check that the burner is turned OFF. 2 Clean the ignitor with a small brush (e.g. old toothbrush) or cotton swab that has been dipped into rubbing alcohol. 1 Wait until the grates have cooled completely. 2 Carefully lift the grates off the cooktop and place them on a protected surface. 3 To remove stubborn stains, soak the grates in a mixture of clothes washing detergent and water. 4 Wash in a mixture of hot water and dishwashing liquid, then rinse and allow to dry. ● The grates are also dishwasher safe. 1 To remove stubborn stains, soak the grates in a mixture of clothes washing detergent and water. 2 Wash in a mixture of hot water and dishwashing liquid, then rinse and allow to dry. ● The wok ring is also dishwashersafe. IMPORTANT! ● Keep the notches of the flame spreaders clear. Soiling may clog these and cause ignition problems. ● Before replacing the burner parts, check that they are dry. Wet burner parts may result in an irregular flame. ● Before lighting a burner you have reassembled, check that all of its parts are positioned correctly. Incorrect assembly can cause dangerous irregular flames and ignition problems. ● Do not put burner parts in the dishwasher as they will become discolored. ● The ignitors must be kept clean and dry to work correctly. Dirty or wet ignitors could cause constant clicking and sparking, even if a flame is present. ● Take care, the grates are heavy. ● Make sure you place a dish towel or other soft cover on the surface before putting a grate on it. 33