Fisher and Paykel OR30SDG4X1 User Guide - Page 28

If a burner does not light, If the flame is irregular

Get Fisher and Paykel OR30SDG4X1 PDF manuals and user guides View all Fisher and Paykel OR30SDG4X1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

COOKTOP USE If a burner does not light Turn the control dial to O (Off) and wait at least one minute before trying again, to all the gas to disperse. If the burner still does not light, check that: ● the range is plugged in and the power supply is switched on ● there is no power failure in your home or neighborhood ● the gas is turned on ● the gas bottle is not empty (if you use bottled gas) ● the flame spreaders are clean and the holes are not clogged ● the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them with a toothbrush and methylated spirits, as shown below. See 'Care and cleaning' for instructions on removing and replacing the burner parts. If the flame is irregular Ignitor Cleaning the ignitor Check that the burner parts (flame spreader and burner cap) are: ● clean and dry ● positioned correctly, as shown below. ● For further advice, see sections 'Care and cleaning' and 'Troubleshooting'. Burner cap Ignitor Flame spreader Burner parts 26 Correct assembly of burner parts Incorrect assembly of burner parts, resulting in irregular flames

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
26
If a burner does not light
Turn the control dial to O (Off) and wait at least one minute before trying again, to all
the gas to disperse.
If the burner still does not light, check that:
●
the range is plugged in and the power supply is switched on
●
there is no power failure in your home or neighborhood
●
the gas is turned on
●
the gas bottle is not empty (if you use bottled gas)
●
the flame spreaders are clean and the holes are not clogged
●
the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them
with a toothbrush and methylated spirits, as shown below.
See ‘Care and cleaning’ for instructions on removing and replacing the burner parts.
Ignitor
Cleaning the ignitor
If the flame is irregular
Check that the burner parts (flame spreader and burner cap) are:
●
clean and dry
●
positioned correctly, as shown below.
●
For further advice, see sections ‘Care and cleaning’ and ‘Troubleshooting’.
Ignitor
Flame spreader
Burner cap
Burner parts
Correct assembly
of burner parts
Incorrect assembly of
burner parts, resulting in
irregular flames
COOKTOP USE