Fluke TiR1 FE Ti10-25-Tir-1 Users Manual - Page 12
Setting the Date, Focusing and Capturing an Image
View all Fluke TiR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Ti10, Ti25, TiR and TiR1 Users Manual Setting the Date To set the date: 1. Press a until Date appears over the F1 softkey. 2. Press the softkey labeled Date. The date can be displayed in one of two formats: MM/DD/YY or DD/MM/YY. 3. Press the softkey labeled with the desired date format. 4. Press the softkey labeled Up (c) or Down (d) to adjust the selected date element. 5. Press the softkey labeled Next to move to the next date element. 6. Press the softkey labeled Done when finished. Setting the Time To set the time: 1. Press a until Time appears over the F3 softkey. 2. Press the softkey labeled Time. The Imager will display time in two different formats: 24 hour or 12 hour. 3. Press the softkey labeled with the desired format. 4. Press the softkey labeled Up (c) or Down (d) to adjust the selected time element. 5. Press the softkey labeled Next to move to the next time element. 6. Press softkey labeled Done when finished. The 12 hour format has a selection for setting whether the time is AM or PM. Focusing and Capturing an Image Point the Imager at the object or area of interest, focus by turning the focus control until the image displayed on the LCD is as clear as possible, and then press and release the trigger. The Imager displays the captured image and a menu. The TiR and Ti10 menu allows image storage. The TiR1 and Ti25 menu allow image storage, image setting adjustments, and recording of audio annotations. To cancel image storage and return to live viewing, press and release the trigger. 6