Fluke TiR1 FE Ti10-25-Tir-1 Users Manual - Page 16
Switching Between PIP and Full IR (Ti10 and TiR Only) - reviews
View all Fluke TiR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Ti10, Ti25, TiR and TiR1 Users Manual 2. Press the softkey labeled Increase to widen the temperature span or Decrease to narrow it. 3. Press the softkey labeled Done to set the Imager's range level. Switching Between PIP and Full IR (Ti10 and TiR Only) The Imager can be set to display a full infrared image (Full IR) or an infrared image surrounded by a visual light image (Picture-in-Picture / PIP). To switch the Ti10 or TiR Imagers between a full infrared display and Picture-In-Picture (PIP) display: 1. Press a until Fusion appears over d. 2. Press the softkey labeled Up or Down to toggle the display between PIP and Full IR. 3. Press the softkey labeled Back/Done when finished. Setting IR-Fusion® and PIP (Ti25 and TiR1 Only) Blending a visual image with a thermal image is called IR-Fusion®. The Imager is set to one of three different levels of blending. In addition to setting the visual to thermal blending, the IR-Fusion® menu is used to select between a full thermal image display, or a Picture-In-Picture (PIP) display. To set the IR-Fusion® level and PIP display: 1. Press a until IRFusion appears over d. 2. Press the softkey labeled IRFusion to reveal the IR-Fusion® menu. 3. Press the softkey labeled Up or Down to move between the six IRFusion® settings. The top three settings select a PIP display. The bottom three settings have full screen IR with different levels of visible blending. 4. Press the softkey labeled Back/Done when finished. Reviewing and Deleting Stored Images To view stored images on the SD card, 1. Press a until Memory appears over c. 2. Press the softkey labeled Memory to reveal the review menu. 3. Press the softkey labeled Review. 10