Fluke TiR1 FE Ti10-25-Tir-1 Users Manual - Page 7

Introduction The Fluke Ti10, Ti25, TiR, and TiR1 Thermal Imagers (hereafter "the Imager") are handheld imaging cameras used for predictive maintenance, equipment troubleshooting, and verification. All four Imagers produce thermal and visual images on a 640 X 480 display. Thermal and visual images are displayed on the Imager LCD and can be saved to an SD Memory card. Transferring images to a PC is accomplished by removing the SD memory card and connecting it to a PC through the included card reader. SmartView™ software is included for image analysis and report generation from these saved images. Both thermal and visual images can be presented simultaneously as a full fusion (thermal displayed over visual) image or as a Picture-In-Picture (PIP) image. The thermal image temperature range starts at -20 °C, and goes up to +100 °C for the TiR and TiR1, +250 °C for the Ti10 and +350 °C for the Ti25. The thermal image can be displayed using any one of a number of color palettes, depending on the model. Imager power is supplied by a rechargeable Nickel Metal-Hydride battery. A full visual image (640 X 480) can be displayed and stored with each IR image. In addition to the features mentioned above, the Ti25 and TiR1 provide voice recording for annotating saved images. Contacting Fluke To contact Fluke, call: 1-800-760-4523 in USA 1-800-363-5853 in Canada +31-402-675-200 in Europe +81-3-3434-0181 in Japan +65-738-5655 in Singapore +1-425-446-6888 from anywhere in the world Or, visit Fluke's Web site at www.fluke.com To register your product, visit register.fluke.com 1