Fujitsu 5530C2 Operator's Guide - Page 104

3.1 Cleaning Materials and Locations requiring Cleaning ■ Cleaning Materials Cleaning Materials Cleaner F1 Parts Number Remarks PA03950-0352 (*1) 1 bottle Moisten a cloth with this fluid and wipe the scanner clean. Lint-free dry cloth - Commercially available one For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner. *1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts. ■ Locations and Cycle for Cleaning The following table shows a standard cycle provided as a guide for cleaning each location. Part to clean Pad ASSY Pick roller Feed rollers Plastic rollers Eject rollers Sheet guides Glass Ultra sonic sensor Standard Cleaning Cycle Clean these parts after every 5,000 scans. 88