Fujitsu 5530C2 Operator's Guide - Page 86

2. Click the [Multifeed] button. ⇒ The following dialog box appears. 3. Configure settings in the [Specify Area for Multifeed Detection] dialog box. 1) Mark the [Enable] check box. • You can specify an area in the direction of the length of the document HINT for detecting multifeed errors. • Unless the [Enable] checkbox is marked, the area of [Select area for applying Multifeed Detection] or [Select area for not applying Multifeed Detection] cannot be specified. In this case, normal multifeed detection described above is performed. (Refer to "6.5 Specifying How to Detect Multifeed" on page 139.) 2) Select whether you want to specify an area to enable or disable multifeed detection. • To specify an area for which the Multifeed Detection is performed: ⇒ Select the [Select area for applying Multifeed Detection] button. • To specify an area for which the Multifeed Detection is NOT performed: ⇒ Select the [Select area for not applying Multifeed Detection] radio button. 3) Specify the [Start] position in the area. Enter a distance from the top of the document as a starting position in millimeter. (Select an even number from 0 mm to 510 mm) 4) Specify the [End] position in the area. Enter a distance from the the top of the document. (Select an even number from 0 mm to 510 mm) ATTENTION The number you enter as the [End] position must be larger than that of the [Start] position. 70