Fujitsu 5530C2 Operator's Guide - Page 23
Placing Documents on the ADF, fi-5530C2 Image Scanner Operator's Guide - cleaning
UPC - 097564307201
View all Fujitsu 5530C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BASIC SCANNER OPERATIONS PORTRAIT A 1.2 Placing Documents on the ADF 4. Place the document on the ADF paper chute. Set the document face-down in the ADF paper chute (so that the side to be scanned faces toward the ADF paper chute). 1 ATTENTION Load the documents facing the ADF paper chute.(face down) This scanner can scan ID cards through the ADF with the following precautions. • Place one card at a time into the ADF. • ID card feeding requires the card to be fed through the ADF in portrait mode as in the following figure. LANDSCAPE • Smooth cards should be placed face down in the ADF. • The card to be scanned should be within the ISO7810 compliance, type ID-1. ISO7810-compliant, Type ID-1 card Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate) Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm • Embossed cards (on which a raised effect is created) cannot be scanned. • Cards that are excessively rigid or less flexible may not feed smoothly and excessive noise may occur. • Cards should be clean from oil and without labels. • Cards cannot be scanned when the imprinter is installed. fi-5530C2 Image Scanner Operator's Guide 7