Fujitsu 5530C2 Operator's Guide - Page 127
Removing Jammed Documents, fi-5530C2 Image Scanner Operator's Guide
UPC - 097564307201
View all Fujitsu 5530C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
3. Remove the jammed documents. 5.1 Removing Jammed Documents ATTENTION Staples, paper clips, etc. cause document jams. Be sure to fully check the document and feed path, and remove any small metal objects such as these. Also, before you start scanning, be sure to remove any staples, clips, etc. from the document. 4. Push in the center of the ADF to close it until the ADF button is locked. Push the center of the ADF 5 TROUBLESHOOTING ATTENTION • Make sure that the ADF is completely closed. When it is not completely closed, document jams or feeding errors may occur. • When the scanning is completed at the pre-determined sheet or canceled, the document might remain inside the ADF even though any error message is not displayed. Follow the procedure below to remove the documents remaining in the ADF. 1. Remove all documents from the ADF paper chute. 2. Open the ADF by pushing down the ADF button. 3. Remove the remaining documents. 4. Push in the center of the ADF to close it until the ADF button is locked. fi-5530C2 Image Scanner Operator's Guide 111