Fujitsu 5530C2 Operator's Guide - Page 132
Symptom 3, The scanning does not start.
UPC - 097564307201
View all Fujitsu 5530C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Symptom 3 The scanning does not start. Is the document loaded correctly NO Load document correctly on on the ADF paper chute? ADF paper chute. YES Is the ADF closed completely? NO Close the ADF completely. YES Is the interface cable connected correctly? YES Is the connector of interface cable broken? NO (when using scanner on SCSI interface) Is the SCSI ID set correctly? YES Does the scanning start after running ON the scanner again? NO NO Connect interface cable correctly. (*) YES Use a new interface cable and correctly connect it. NO Turn OFF the scanner and set the SCSI ID correctly, then turn ON the scanner again. (*) YES The scanner operation is normal. If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *) For details, refer to Getting Started "2.2 Connecting the scanner to your PC". 116