Fujitsu S300M Operator's Guide - Page 117

5.2 Saving Data in the Specified Folder 4. Click the close button in the upper left corner of the window. ⇒ The "ScanSnap Manager - Scan and Save Settings" window closes. • To start scanning right after selecting the profile, press the [SCAN] button HINT on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan and Save Settings". • Changes you have made in the above procedure take effect from the next time you scan documents using the profile. For details on how to change settings, refer to "4.3 Saving Scanning Settings" (page 70). • "Scan to Folder" profile can be selected by selecting "Scan to Folder" in the "Select a Profile" window which pops up when clicking the ScanSnap Manager icon . Operation 5. Load the document onto the ScanSnap. For details, refer to "3.2 Paper Sizes of Documents to be Scanned" (page 5 39) and "3.3 Loading Documents" (page 41). About Actions 6. Press the [SCAN] button . ⇒ Scanning is started. ⇒ When scanning is complete, the preview window appears. Operation 7. Verify a scanned image in the preview window. You can also change file names and destination folders and specify whether to state a path to a destination folder in an e-mail message to notify other members of it. Window size is scaled up or down by dragging the lower right corner of the "Scan to Folder" window with the mouse cursor. The previewed image is also scaled up or down according to the window size. ScanSnap S300M Operator's Guide 97