Fujitsu S300M Operator's Guide - Page 65

■ ScanSnap Manager Menu 4.1 About the ScanSnap Icon This menu appears when clicking and holding down the ScanSnap Manager icon . In this menu, you can perform the following: Item Function Duplex scan Simplex scan Settings Both the front and back sides of the document are scanned at the same time. Scanning is performed according to the settings configured in the "ScanSnap Manager - Scan and Save Settings" window. Only one side of the document is scanned at one time. Scanning is performed according to the "ScanSnap Manager - Scan and Save Settings" window. The "ScanSnap Manager - Scan and Save Settings" window appears. Settings configured in this dialog are used when scanning is performed with a [SCAN] button press. ⇒ Refer to "4.2 Changing Scanning Settings" (page 47). 4 Use Quick Menu You can switch between Quick Menu Mode and Profile Mode by marking/ clearing this. You can select an operational mode that is enabled upon scanning with a Setting the ScanSnap [SCAN] button press. ⇒ Refer to "3.1 Flow of Operations" (page 22). Select a Profile Profile Management The "Select a Profile" window appears. For details, refer to ""Select a Profile" window" (page. 46) The "Profile Management" window appears. You can edit profiles. ⇒ Refer to "4.3 Saving Scanning Settings" (page 70). Check consumable supplies Help Keep In Dock The "ScanSnap Manager - Check consumable status" window appears. Reset consumable counters to 0 after you replace consumables. Refer to "9.1 Replacing Consumables" (page 180). You can view the Help topics, the version information of ScanSnap Manager. You can add the ScanSnap Manager icon to the Dock menu. Open at Login Show In Finder Hide Quit Marking this sets to automatically start up ScanSnap Manager when Mac OS is started up. You can view the contents of the "ScanSnap" folder with Finder. You can hide the "ScanSnap Manager - Scan and Save Settings" window in the desktop. You can quit ScanSnap Manager. ScanSnap S300M Operator's Guide 45