Fujitsu S300M Operator's Guide - Page 79

4.2 Changing Scanning Settings ■ Color mode: Specify whether to scan documents in color mode or in black-and-white mode. By clicking , you can select one of the following modes: • Auto Color Detection (Automatically recognizes the document color) The ScanSnap automatically recognizes whether the document to be scanned is color or black-and-white, and switches the scan mode accordingly. • Color All documents are scanned in the color mode. This setting is for scanning color documents. ATTENTION The ScanSnap may not be able to scan the part of page marked in fluorescent marker, depending on the color and density of the marker. (Check beforehand that the color of your fluorescent marker can be reproduced by the ScanSnap) • B&W 4 All documents are scanned in B&W mode. This setting is for scanning black-and-white documents containing mostly text. File sizes can also be kept smaller than if the document is scanned in the color mode. Setting the ScanSnap In normal circumstances, use "Auto Color Detection." HINT If this setting is specified, you do not have to change the color mode each time you scan a document. *However, the following types of color documents may be recognized as black and white: • Faintly-toned documents • Documents that have a slightly-colored portion To scan such documents in color, select "Color" in the [Color mode] pop-up menu. In addition, the following type of documents may be recognized as color. • Documents with many shaded (gray) areas To scan such a document in B&W mode, select B&W from the [Color mode] pop-up menu. ScanSnap S300M Operator's Guide 59