Fujitsu S510M Operator's Guide - Page 105
Changing Carrier Sheet Settings, ScanSnap, S500 Operator's Guide
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Change the Carrier Sheet settings here. 3.6 Changing Carrier Sheet Settings The image of the [Mode]. A simple explanation for the [Mode]. Enable the setting, and close the screen. Cancel the setting, and close the screen. 3 Show help. Basic Scanner Operations The following explains the settings that can be changed on the "Carrier Sheet Settings." Mode Specifies the scanning method for using the Carrier Sheet. The following are two modes. •Create facing pages in one image Scan a document folded in two half, in duplex mode and output an image of facing pages joining the front and back images together. This mode is for scanning a document larger than A4 size, such as A3/B4/11" x 17." •Create front and back images separately Outputs a cropped image which fits the size of the scanned document. This mode is for inserting and scanning documents such as photographs which you do not want to scratch, or documents of irregular size such as clippings of information that are difficult to load and scan directly on the scanner, in the Carrier Sheet. If both sides are scanned, the front and back images are generated separately. ATTENTION • When scanning in [Create facing pages in one image] mode, select [Duplex Scan] on the [Scanning] settings of [ScanSnap Manager]. • The method of loading documents differs with the mode. Refer to "Loading Documents with the Carrier Sheet" (page 37) for more details. ScanSnap S500 Operator's Guide 87