Fujitsu S510M Operator's Guide - Page 158
Symptom, Check This Item, Resolution, Option] in the Scan and Save Set
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Symptom The scanned image shifts or is distorted. The image scanned is too light or too dark. Lines on the document are blurred. (Example: Ruled lines on a table cannot be seen.) The scanning speed is very slow. Multi-feeds (*4) occur frequently. Check This Item Resolution Is the document loaded correctly? Load the document correctly following the instruction in "3.3 Loading Documents" (page 39) Is the "Brightness (Black and White scanning only)" setting on [Option] of the [Scanning] tab set to extremely Light or Dark? Adjust "Brightness" at [Scanning] [Option] in the "Scan and Save Settings" window. Are you scanning in color mode, documents including handwritten or typed text, tables or frames with ruled lines? The color mode is used for capturing colored images like photos in high quality. For other documents including textual content, select the checkbox for [Setting for text only document] at [Scanning] - [Option] in the "Scan and Save Settings" window. If it does not improve even after you have tried this method, change "Image quality" setting. Does your PC meet the recommended system requirements? Confirm the system requirements in " Before Installing ScanSnap" (page 6). Scanning speed will be slower whenever the recommended CPU and memory requirements are not met. If this is the case, at [Scanning] [Option] in the "Scan and Save Settings" window, clear the checkboxes of the following to increase the scanning speed. • Correct skewed character strings automatically • Allow automatic image rotation Is the USB 1.1 connected? Note: When using an USB1.1 interface, the data transfer rate may be slower due to large data sizes. If your PC has an USB 2.0 port, connect the scanner to this port. (If using a USB hub, it must also support USB 2.0 interfaces.) (*3) Is the Pad ASSY dirty? Clean the pad by following the instructions in "6.3 Cleaning the Inside of the Scanner" (page 148). Is the Pad ASSY worn? Clean the Pad ASSY by following the instructions in "7.2 Replacing the Pad ASSY" (page 156). Is the document stack thicker than 5mm? Reduce the number of sheets in the document stack to 5 mm thickness or less. 140