Fujitsu S510M Operator's Guide - Page 160

Scan and Save Settings

Page 160 highlights

Symptom Scanned images are skewed. The orientation of scanned images is not displayed correctly (when "Allow automatic image rotation" is enabled). The scanned images cannot be read. A part of the document does not appear in the scanned image. The document is not fed properly or gets jammed. When the document is scanned with Carrier Sheet, a message, "Document size incorrect", appears. When the document is scanned with Carrier Sheet, a paper jam occurs frequently. Black lines are produced on the scanned document. Check This Item Resolution Are the documents fed into the ADF with a skew of more than +/-5 degrees? The "Correct skewed character strings automatically" function can correct skewed images up to +/-5 degrees. Load the document onto the scanner so that the document skew does not exceed this limit. Depending on the contents of document, the automatic image deskew may not work properly. Refer to " Correct skewed character strings automatically." (page 65) Depending on the contents of document, the automatic image rotation may not work properly. Refer to " Allow automatic image rotation." (page 67) Have you scanned documents written in small letters? When small letters are squashed, right click "ScanSnap Manager" icon on the task bar and select Excellent in the [Scanning] tab and scan them again. Is the "Allow automatic blank page removal" enabled? Clear the check box for "Allow automatic blank page removal" on [Option] of the [Scanning] tab of [Scan and Save Settings] 1. Is the inside of the scanner dirty? 2. Are you scanning one of the following? Thin paper Torn paper Folded paper 1.Clean the dirty locations. 2.Use the Carrier Sheet for each page if you have difficulties feeding the document. Did you put multiple smallsize materials (pictures/ post cards) in Carrier Sheet for scanning? Put only one small-size material (pictures/post cards) in Carrier Sheet per scanning. ---- Is the scanned documents written with a pencil? Feed about 50 sheets of PPC paper or recycled paper, and then scan the document by using Carrier Sheet. * You can use either unused or used PPC/recycled paper. It is recommended to use Carrier Sheet for scanning. If you are not using Carrier Sheet for scanning such documents, clean rollers as often as possible. For information about how to clean rollers, refer to "6.2 Cleaning the Scanner Exterior" (page 147). 142

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

142
Scanned images are
skewed.
Are the documents fed into
the ADF with a skew of
more than +/-5 degrees?
The "Correct skewed character
strings automatically" function can
correct skewed images up to +/-5
degrees. Load the document onto
the scanner so that the document
skew does not exceed this limit.
Depending on the contents
of document, the automatic
image deskew may not
work properly.
Refer to " Correct skewed character
strings automatically." (page 65)
The orientation of
scanned images is not
displayed correctly
(when "Allow automatic
image rotation" is
enabled).
Depending on the contents
of document, the automatic
image rotation may not
work properly.
Refer to " Allow automatic image
rotation." (page 67)
The scanned images
cannot be read.
Have you scanned docu-
ments written in small let-
ters?
When small letters are squashed,
right click "ScanSnap Manager" icon
on the task bar and select Excellent
in the [Scanning] tab and scan them
again.
A part of the document
does not appear in the
scanned image.
Is the “Allow automatic
blank page removal"
enabled?
Clear the check box for “Allow auto-
matic blank page removal" on
[Option] of the [Scanning] tab of
[Scan and Save Settings]
The document is not fed
properly or gets
jammed.
1. Is the inside of the scan-
ner dirty?
2. Are you scanning one of
the following?
Thin paper
Torn paper
Folded paper
1.Clean the dirty locations.
2.Use the Carrier Sheet for each
page if you have difficulties feeding
the document.
When the document is
scanned with Carrier
Sheet, a message,
"Document size incor-
rect", appears.
Did you put multiple small-
size materials (pictures/
post cards) in Carrier
Sheet for scanning?
Put only one small-size material (pic-
tures/post cards) in Carrier Sheet
per scanning.
When the document is
scanned with Carrier
Sheet, a paper jam
occurs frequently.
----
Feed about 50 sheets of PPC paper
or recycled paper, and then scan the
document by using Carrier Sheet.
* You can use either unused or used
PPC/recycled paper.
Black lines are pro-
duced on the scanned
document.
Is the scanned documents
written with a pencil?
It is recommended to use Carrier
Sheet for scanning.
If you are not using Carrier Sheet for
scanning such documents, clean
rollers as often as possible.
For information about how to clean
rollers, refer to "6.2 Cleaning the
Scanner Exterior" (page 147).
Symptom
Check This Item
Resolution