Fujitsu S510M Operator's Guide - Page 140

<Scanning procedure&gt, Load the business cards onto the scanner., Press the [SCAN] button

Page 140 highlights

Operation 1. Load the business cards onto the scanner. • Load the business cards face down. • When you scan two or more business card, set them in piles. • Adjust the side guides so that they contact both sides of the business cards. If there is a space between the business cards and the side guides, place the cards along the left side guide. Paper chute Business card Side guide [SCAN] button 2. Press the [SCAN] button on the scanner. ⇒ Scanning will be started. After the scanning has finished, the "CardMinder" screen is displayed. ATTENTION • Do not connect or disconnect other USB devices during the scanning operation. • Do not close the paper chute or press the [POWER] button on the scanner during the scanning operation. • Do not switch the user to log in during the scanning operation. • As the default setting, documents are scanned at "Duplex" mode when you HINT press the [SCAN] button. Using "ScanSnap Manager", you can set the scanner to scan documents in "Simplex" mode by pressing [SCAN] button. • You can also start scanning with the "ScanSnap Manager" icon S on the task bar. *For details, refer to "3.4 Changing Scan Settings" (on page 53). 122

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

122
<Scanning procedure>
Operation
1.
Load the business cards onto the scanner.
Load the business cards face down.
When you scan two or more business card, set them in piles.
Adjust the side guides so that they contact both sides of the business cards. If there is a space
between the business cards and the side guides, place the cards along the left side guide.
2.
Press the [SCAN] button
on the scanner.
Scanning will be started. After the scanning has finished, the "CardMinder" screen is
displayed.
ATTENTION
Do not connect or disconnect other USB devices during the scanning
operation.
Do not close the paper chute or press the [POWER] button on the scanner
during the scanning operation.
Do not switch the user to log in during the scanning operation.
HINT
As the default setting, documents are scanned at "Duplex" mode when you
press the [SCAN] button. Using "ScanSnap Manager", you can set the
scanner to scan documents in "Simplex" mode by pressing [SCAN] button.
You can also start scanning with the "ScanSnap Manager" icon
on the
task bar.
*For details, refer to "3.4 Changing Scan Settings" (on page 53).
Paper chute
Business card
Side guide
[SCAN] button
S