Garmin Edge 130 Plus Owners Manual - Page 16

Marking Laps You can use the Auto Lap feature to mark a lap at a specific distance automatically, and you can mark laps manually. This feature is helpful for comparing your performance over different parts of an activity. 1 Hold . 2 Select Ride Settings > Laps. 3 Select an option: • Select Auto Lap to use the Auto Lap feature. The device automatically marks a lap every 5 miles or 5 kilometers, depending on your system settings (System Settings, page 12). • Select Lap Key to use to mark a lap during an activity. Using Auto Pause® You can use the Auto Pause feature to pause the timer automatically when you stop moving. This feature is helpful if your activity includes stop lights or other places where you need to stop. NOTE: The paused time is not saved with your history data. 1 Hold . 2 Select Ride Settings > Auto Pause. Using Auto Scroll You can use the Auto Scroll feature to cycle through the training data pages automatically while the timer is running. 1 Hold . 2 Select Ride Settings > Auto Scroll. 3 Select a display speed. Changing Data Fields You can change the data field combinations for the pages that appear while the timer is running (Data Fields, page 14). 1 Hold . 2 Select Ride Settings > Data Pages. 3 Select > Layout. 4 Select or to change the layout. 5 Select to enable the layout. 6 Select or to edit the data fields. Position Format: Allows you to set the format for viewing geographical coordinate position details. Auto Power Off: Allows you to set the device to automatically power down after 10 minutes of inactivity. Reset: Allows you to reset the system settings or delete all user data (Restoring All Default Settings, page 14). About: Displays the software version and unit ID, and allows you to check for software updates (Viewing E-label Regulatory and Compliance Information, page 14). Changing the Device Language 1 Hold . 2 Select System > Language. Using the Backlight You can select any key to turn on the backlight. 1 Hold . 2 Select System > Backlight. 3 Select an option: • To adjust the timeout, select Timeout. • To adjust the brightness, select Brightness. • To set the backlight to turn on for key presses and alerts, select Keys and Alerts. 4 Use and to select an option. 5 Select . Turning the Device Tones On and Off 1 Hold . 2 Select System > Sounds. Changing the Units of Measure You can customize units of measure for distance and speed. 1 Hold . 2 Select System > Units. Using the Auto Power Off Feature This feature automatically turns off the device after 10 minutes of inactivity. 1 Hold . 2 Select System > Auto Power Off. Phone Settings Hold , and select Phone. Status: Enables Bluetooth wireless technology. NOTE: Other Bluetooth settings appear only when Bluetooth wireless technology is enabled. Notifications: Allows you to enable phone notifications from your compatible smartphone. Pair Phone: Connects your device with a compatible Bluetooth enabled smartphone. This setting allows you to use Bluetooth connected features, including LiveTrack and activity uploads to Garmin Connect. System Settings Hold , and select System. Language: Sets the language displayed on the device (Changing the Device Language, page 12). Backlight: Sets the backlight timeout, brightness, and behavior (Using the Backlight, page 12). Sounds: Turns audible tones on or off for keys and alert messages (Turning the Device Tones On and Off, page 12). Units: Sets the units of measure used on the device. Time: Sets the device to display time in a 12-hour or 24-hour format. Setting Up Extended Display Mode You can use your Edge 130 Plus device as an extended display to view data screens from a compatible Garmin multisport watch. For example, you can pair a compatible Forerunner® device to display its data screens on your Edge device during a triathlon. 1 From your Edge device, hold . 2 Select Extended Display > . 3 From your compatible Garmin watch, select Settings > Sensors & Accessories > Add New > Extended Display. 4 Follow the on-screen instructions on your Edge device and Garmin watch to complete the pairing process. The data screens from your paired watch appear on the Edge device when the devices are paired. NOTE: Normal Edge device functions are disabled while using Extended Display mode. After pairing your compatible Garmin watch with your Edge device, they connect automatically the next time you use Extended Display mode. Exiting Extended Display Mode 1 While the device is in Extended Display mode, hold . 2 Select Exit Extended Display > Yes. 12 Customizing Your Device