Garmin FR70 Owners Manual - Page 37

Replacing the FR70 Battery, All of your settings are preserved, except the time of day. - battery replacement

Get Garmin FR70 PDF manuals and user guides View all Garmin FR70 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Replacing the FR70 Battery All of your settings are preserved, except the time of day. Note: Before replacing the battery, save all of your data to your computer or to history (see page 26). Note: Garmin recommends that you replace the battery in a lowhumidity environment to prevent condensation from forming inside the watch. 1. Use a small Phillips screwdriver to remove the screws, from the FR70 back cover. Appendix 2. Carefully lift the back cover, and remove the battery. Note: Be careful not to move the red O-ring gasket in the battery compartment. Note: Be careful not to contaminate the O-ring gasket. Any contamination could compromise the performance of the watch. 3. Replace the battery with the positive side facing up. Note: Make sure the gasket is seated correctly in the gasket trough before screwing the back plate on. 4. Replace the back cover and the four screws ensuring the gasket is in place. Do not over tighten the screws. (Garmin recommends a torque of 1 in.-lb.) FR70 Owner's Manual 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
FR70 Owner’s Manual
35
Appendix
Replacing the FR70 Battery
All of your settings are preserved,
except the time of day.
nOTE:
Before replacing the
battery, save all of your data to
your computer or to history (see
page 26
).
nOTE:
Garmin recommends that
you replace the battery in a low‑
humidity environment to prevent
condensation from forming inside
the watch.
1. Use a small Phillips screwdriver
to remove the screws, from the
FR70 back cover.
2.
Carefully lift the back cover, and
remove the battery.
nOTE:
Be careful not to move
the red O‑ring gasket in the
battery compartment.
nOTE:
Be careful not to
contaminate the O‑ring gasket.
Any contamination could
compromise the performance of
the watch.
3. Replace the battery with the
positive side facing up.
nOTE:
Make sure the gasket
is seated correctly in the gasket
trough before screwing the back
plate on.
4.
Replace the back cover and the
four screws ensuring the gasket
is in place. Do not over tighten
the screws. (Garmin recommends
a torque of 1 in.-lb.)