Garmin GPSMAP 96 Owner's Manual - Page 11
Installing the Batteries, setting the battery type can be used. Stored data is - 96c external antenna
View all Garmin GPSMAP 96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the Batteries The GPSMAP 96/96C operates on two AA batteries (not included), which are located in the back of the unit. Alkaline or NiMH batteries (see page 103 for setting the battery type) can be used. Stored data is not be lost when batteries are removed. To install batteries: 1. Remove the battery cover from the back of the unit. Turn the D-Ring 1/4 turn counterclockwise and then pull. 2. Insert the batteries, observing the proper polarity. A polarity diagram can be found molded into the battery compartment. 3. Reinstall the battery cover by reinserting the locking pin in the back of the unit. Turn the D-Ring 1/4 turn clockwise to lock in place. Getting Started > External Antenna Connector (under weather cover) Battery Compartment Locking D-Ring Battery Compartment Cover Power/Data Cable Connector (Serial Port) (under weather cover) USB Connector (under weather cover) Carry Lanyard connection Locking Pin Slot Battery Compartment 96/96C Owner's Manual