Garmin GPSMAP 96 Owner's Manual - Page 113
Text Out, RTCM In, RTCM In/NMEA Out, To change an Interface Setup feature
View all Garmin GPSMAP 96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Text Out-allows ASCII text output of location and velocity information. No input. RTCM In-provides DGPS input using a standard RTCM SC-104 format. No output. Main Menu > NOTE: When the USB cable is connected to the GPSMAP 96/96C, it is automatically detected and communicates only in Garmin Format. When the USB is connected, Garmin format does not communicate through the Serial connection, while all other formats can be used by the Serial connection with the USB still connected. Interface Setup-RTCM In/NMEA Out RTCM In/NMEA Out-allows DGPS input using a standard RTCM SC-104 format and supports the output of standard NMEA 0183 version 3.01 data. RTCM In/Text Out-allows DGPS input using a standard RTCM SC-104 format and supports the output of simple ASCII text output of location and velocity information None-provides no interfacing capabilities. To change an Interface Setup feature: 1. Access the Interface Setup Page as explained at the beginning of this section. 2. Highlight a setting, and press ENTER. 3. When you select Text Out and /or RTCM In, additional fields appear. Use the ROCKER to highlight Baud Rate, and press ENTER. Use the ROCKER to highlight a setting, and press ENTER. 4. For Garmin DGPS or RTCM In/NMEA Out, use the ROCKER to highlight Beacon, and press ENTER. Use the ROCKER to select Scan or User, and press ENTER. 96/96C Owner's Manual 105