Garmin GPSMAP 96 Owner's Manual - Page 59
Navigating a Route, from the Routing Setup Both Go To navigation
View all Garmin GPSMAP 96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
each turn in the route a turn page shows a guidance message and graphic of the turn. You can view the turns at any time by pressing the ROCKER up or down while the route is active. • In Automotive Mode these two navigation methods change when you select the "Follow Roads" option from the Routing Setup Page. Both Go To navigation and point to point routing become routes that allow you to navigate using roads. The routes use existing roadways (either those in the basemap or from downloaded detail mapping) to automatically calculate a route to your destination. Turns on roadways are added to the active route page and is preceded by a guidance message with a graphic screen of the turn. If there are not enough roads at your location to calculate a route, a message appears. Basic Operation > Navigating a Route After you have created a route, you can begin navigation immediately or save it to the Saved Routes list as explained on page 72. When you are navigating a route, a guidance message and graphic view of turns in the route shows as you approach each one. Using the "Follow Roads" option from the Routing Setup Page increases the number of turns and shows an Active Route Page with a list of turns. If you selected the "Off Road" option you can view only the list of points for a route from the Active Route Page. (See Routing Setup on page 107) 96/96C Owner's Manual 51