Garmin GPSMAP 96 Owner's Manual - Page 26
Select Approach, To select an approach using the Go - gps 96c
View all Garmin GPSMAP 96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic Operation > Select Approach The Select Approach option replaces a destination airport with the sequence of waypoints for the selected approach. Keep in mind that the airport must have a published approach (GPS, RNAV, VOR, NDB, localizer, or ILS) and only the final course segment (from final approach fix to missed approach point) of the published approach is available in the GPSMAP 96/96C. Approach Identifier 18 Note: When using a route, and on the final leg of the route to the destination airport, the Select Approach option allows you to quickly retrieve and select available approaches. This option overrides your current route. The original route is still available for later use. The approaches provided in the Jeppesen database are for monitoring purposes only. The GPSMAP 96/96C is not an IFR-approved instrument and should not be used as a primary source of navigation guidance in instrument conditions. To select an approach using the Go To page: 1. Press DIRECT TO D to show the Go To Page. 2. Use the ROCKER to highlight Approach. 3. Use the ROCKER to select the approach from the third field, and press ENTER. 4. Use the ROCKER to select Vectors or FAF, and press ENTER. The GPSMAP 96/96C removes the destination airport from the Go To and replaces it with the approach waypoints. 96/96C Owner's Manual