Garmin GWX 70 Installation Manual - Page 37

Counterweight Installation GWX 70 18 only, Mounting Instructions, GWX 70 Installation Manual, Rev. C

Get Garmin GWX 70 PDF manuals and user guides View all Garmin GWX 70 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

3.4.2 Counterweight Installation (GWX 70 18" only) Install the Counterweight (011-02546-00), verifying orientation of counterweight and screws, as shown in Figure A-3. 3.4.3 Mounting Instructions 1. Refer to Appendix A for instructions on mounting the GWX 70 using the hardware provided. 2. Refer to Section 3.3 to assemble the GWX 70 connector kit. 3. If required, attach the GWX 70 Mounting Adapter (011-02545-00) as shown in Appendix A (Figure A-1 or A-2). 4. Check unit for clearance in all extreme positions of scan and tilt. 5. Ensure the wiring harness is routed in such a way that it can not be struck by or interfere with the unit movement through the full scan and tilt range. 190-00829-01 Rev. C GWX 70 Installation Manual Page 3-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
190-00829-01
GWX 70 Installation Manual
Rev. C
Page 3-11
3.4.2
Counterweight Installation (GWX 70 18" only)
Install the Counterweight (011-02546-00), verifying orientation of counterweight and screws, as shown in
Figure A-3.
3.4.3
Mounting Instructions
1.
Refer to Appendix A for instructions on mounting the GWX 70 using the hardware provided.
2.
Refer to Section 3.3 to assemble the GWX 70 connector kit.
3.
If required, attach the GWX 70 Mounting Adapter (011-02545-00) as shown in Appendix A
(Figure A-1 or A-2).
4.
Check unit for clearance in all extreme positions of scan and tilt.
5.
Ensure the wiring harness is routed in such a way that it can not be struck by or interfere with the
unit movement through the full scan and tilt range.