Gateway 510 Gateway 510-Series Computer User's Guide - Page 206
The red-striped, edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
View all Gateway 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Chapter 13: Upgrading Your Computer 3 Lift the drive release latch up and slide the hard drive out of the hard drive bay. 4 Set the jumpers on the drive. See the drive documentation for further instructions. 5 Slide the new drive in the drive bay. Push firmly until the drive release latch locks the hard drive into place. 6 Reconnect the drive cables using your notes from Step 2. The red-striped edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1 on the drive (typically on the side closest to the power supply connection). See the drive documentation for further instructions. 7 Replace the side panel following the instructions in "Replacing the side panel" on page 192. 198 www.gateway.com
198
Chapter 13: Upgrading Your Computer
www.gateway.com
3
Lift the drive release latch up and slide the hard drive out of the hard drive
bay.
4
Set the jumpers on the drive. See the drive documentation for further
instructions.
5
Slide the new drive in the drive bay. Push firmly until the drive release
latch locks the hard drive into place.
6
Reconnect the drive cables using your notes from
Step 2
. The red-striped
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side closest to the power supply connection).
See the drive documentation for further instructions.
7
Replace the side panel following the instructions in
“Replacing the side
panel” on page 192
.