Gateway ML6227q 8511725 - Gateway Service Guide

Gateway ML6227q Manual

Get Gateway ML6227q PDF manuals and user guides View all Gateway ML6227q manuals
Add to My Manuals
Save this manual to your list of manuals

Gateway ML6227q manual content summary:

  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 1
    GATEWAY NOTEBOOK SERVICEGUIDE ®
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 2
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 3
    the notebook 6 Removing the battery 6 Adding or replacing memory modules 7 Replacing the DVD drive 11 Replacing the cooling assembly 14 Replacing the processor 19 Replacing the IEEE 802.11 wireless card 22 Replacing the hard drive 26 Replacing the keyboard cover 29 Replacing the keyboard
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 4
    Contents ii
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 5
    the notebook • Adding or replacing memory modules • Replacing the DVD drive • Replacing the cooling assembly • Replacing the processor • Replacing the IEEE 802.11 wireless card • Replacing the hard drive • Replacing the keyboard cover • Replacing the keyboard • Replacing the CMOS battery • Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 6
    service guide for the notebook. Failure to follow the approved tasks for the notebook model may result in damage to the notebook. The label on the bottom of the notebook contains information that identifies the notebook model and its features. Online Support: Tech Support Phone: Hours: Model
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 7
    www.gateway.com Identifying components Use this chart to identify the main components of the notebook. For a complete list of replaceable parts, see "Contents" on page i. LCD panel assembly (see page 38) Keyboard cover (see page 29) Keyboard (see page 31) Cooling assembly (see page 11) Processor (
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 8
    lighting to make part identification easier. • Keep your work surface free from clutter and dust that may damage components. • Use a magnetized screwdriver for removing screws. • When removing components that are attached to the notebook by a cable, unplug the cable before removing the screws, when
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 9
    www.gateway.com Preventing static electricity discharge Warning To avoid exposure to dangerous electrical voltages and moving parts, turn off the notebook, remove the battery, and unplug the power cord, modem cable, and network cable before opening the case. Warning To prevent risk of electric
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 10
    moving parts, turn off the notebook, remove the battery, and unplug the power cord, modem cable, and network cable before opening the case. Replace the cover before you restore power or reconnect the modem and network cables. To prepare the notebook for maintenance: 1 Make sure that the DVD drive
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 11
    .com Adding or replacing memory modules Important Use only memory modules designed for this Gateway notebook. Tools you need to complete this task: Phillips #0 screwdriver Screws removed during this task: 1 black (keyboard) Memory bay To add or replace memory modules: 1 Complete the steps in
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 12
    Replacing Notebook Components 2 Remove the keyboard screw. Tip The screw hole is marked with a K. Keyboard screw 3 Loosen the six memory bay cover screws (these screws cannot be removed). Tip Depending on your model, not all screws may be captive. Screws Screws 8
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 13
    www.gateway.com 4 Use the thumb notch to lift the memory bay cover, then remove it. Be careful not to break off the tabs located on the end of the cover opposite of the thumb notch. Thumb notch 5 If you are removing a module, gently press outward on the clip at each end of the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 14
    Replacing Notebook Components 6 Pull the memory module out of the slot. 7 Hold the new or replacement module at a 30-degree angle and with the tab in the memory bay. 8 Replace the memory bay cover, then tighten the cover screws. 9 Replace the keyboard screw. Tip The screw hole is marked with a K. 10
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 15
    www.gateway.com Replacing the DVD drive Tools you need to complete this task: Phillips #0 screwdriver Screws removed during this task: 1 black (keyboard) 1 black (DVD drive) To replace the DVD drive: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the keyboard screw. Tip The
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 16
    Replacing Notebook Components 3 Loosen the six memory bay cover screws (these screws cannot be removed). Tip Depending on your model, not all screws may be captive. Screws Screws 4 Use the thumb notch to lift the memory bay cover, then remove it. Be careful not to break off the tabs located on the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 17
    bracket. DVD bracket 7 Slide the new DVD drive into the drive bay. Make sure that the drive fits securely in the bay. 8 Secure the DVD drive with the screw removed in Step 5. 9 Replace the memory bay cover, then tighten the cover screws. 10 Replace the keyboard screw. Tip The screw hole is marked
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 18
    Additional materials you may need to complete this task: • X-23-7762 thermal grease Screws removed during this task: 1 black (keyboard) To replace the cooling assembly: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the keyboard screw. Tip The screw hole is marked with
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 19
    www.gateway.com 3 Loosen the six memory bay cover screws (these screws cannot be removed). Tip Depending on your model, not all screws may be captive. Screws Screws 4 Use the thumb notch to lift the memory bay cover, then remove it. Be careful not to break off the tabs located on the end of the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 20
    Replacing Notebook Components 5 Loosen the three or four screws (these screws cannot be removed) that secure the cooling assembly to the system board. Use loosen them in reverse numerical order. Important The number of screws varies by model. Screw Screw Screw -OR- Screw Screw Screw Screw 16
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 21
    www.gateway.com 6 .At the same time as you lift, move the cooling assembly away from the side of the notebook, then remove it. thermal pad, go to Step 10. -ORIf your cooling assembly uses thermal grease, remove any thermal grease residue from the processor using a soft cloth and isopropyl alcohol. 9
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 22
    Replacing Notebook Components 12 Tighten the three or four screws, in numerical order, in the them in numerical order. Important The number of screws varies by model. 13 Replace the memory bay cover, then tighten the cover screws. 14 Replace the keyboard screw. Tip The screw hole is marked with a K.
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 23
    to complete this task: • X-23-7762 thermal grease Screws removed during this task: 1 black (keyboard) To replace the processor: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the cooling assembly by following the instructions in "Replacing the cooling assembly" on page 14. 19
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 24
    Replacing Notebook Components 3 Use a flat-blade screwdriver to turn the processor lock screw ¼-turn counter-clockwise. -ORUse a flat-blade screwdriver to turn the processor lock screw ½-turn counter-clockwise. You will hear a click when the processor lock is unlocked. 20
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 25
    thermal grease, remove any thermal grease residue from the cooling assembly using a soft cloth and isopropyl alcohol. 7 Place new thermal grease on the processor. Use only enough to cover the CPU die. 8 Replace the cooling assembly by following the instructions in "Replacing the cooling assembly
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 26
    in place during any and all operation of the notebook's wireless feature. Tools you need to complete this task: Phillips #0 screwdriver Screws removed during this task: 1 black (wireless card) Select models only Wireless bay To replace the 802.11 wireless card: 1 Complete the steps in "Preparing the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 27
    www.gateway.com 2 Loosen the wireless bay cover screw (this screw cannot be removed), then remove the wireless bay cover. Screw 3 Unplug the two antenna cables. 4 Move the antenna cables out of the way. 23
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 28
    Replacing Notebook Components 5 If the wireless card is held by clips, press outward on the clip at each side of the card until the card tilts up. -ORIf the wireless card is held by a screw, remove the screw. Screw 24
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 29
    www.gateway.com 6 Pull the old card out of the slot. 7 Hold the new card at antenna cables out of the way. 9 If the wireless card is held by clips, press the card down until it clicks into place. -ORIf the wireless card is held by a screw, replace the screw. 10 Reattach the light gray antenna cable
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 30
    the hard drive Tools you need to complete this task: Phillips #0 screwdriver Screws removed during this task: 2 black (hard drive kit) 4 chrome (hard drive cover) Hard drive kit To replace the hard drive: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the two hard drive kit
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 31
    www.gateway.com 3 Slide the old hard drive kit out of the notebook. 4 If the hard drive shipped to you already attached to a new cover, go to Step 8. -OR- If the hard drive shipped to you without a new cover, remove the four screws that secure the hard drive to the hard drive bay cover. Screws
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 32
    Replacing Notebook Components 5 Remove the cover from the old drive. 6 Place the new drive, label side up, onto the cover so the screw holes line up. 7 Replace the screws that secure the cover to the drive. 8 Slide the new hard drive kit into the notebook, then replace the kit screws. 28
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 33
    .gateway.com Replacing the keyboard cover Tools you need to complete this task: Flat-blade driver - OR - Phillips #0 screwdriver Screws removed during this task: Scribe or non-marring tool 2 black (keyboard cover) To replace the keyboard cover: 1 Complete the steps in "Preparing the notebook
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 34
    Replacing Notebook Components 6 Insert the small, flat-blade screwdriver or non-marring tool under the bottom of the right hinge cover, then gently pry it up. 7 Pull the old cover off the notebook. You will hear small snapping sounds as the cover comes away from the notebook. 8 Place the new cover
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 35
    -blade driver - OR - Phillips #0 screwdriver Screws removed during this task: Scribe or non-marring tool 2 black (keyboard cover) 1-3 black (keyboard) To replace the keyboard: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the keyboard cover by following the instructions
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 36
    Replacing Notebook Components 5 Close the LCD panel, turn the notebook over so the bottom is facing up, then loosen the six memory bay cover screws (these screws cannot be removed). Tip Depending on your model, not all screws may be captive. Screws Screws 6 Use the thumb notch to lift the memory bay
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 37
    www.gateway.com 7 Loosen the wireless bay cover screw (this screw cannot be removed), then remove the wireless bay cover. Screw 8 Remove the two optional keyboard screws. Tip Depending on the keyboard features, one or both of these screws may be absent. Screw Screw 9 Turn the notebook over so the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 38
    Replacing Notebook Components 11 Carefully rotate the keyboard toward you so it lies keys-down on top of the notebook. Be careful not to damage the LCD panel. 12 Lift the black keyboard connector clip, then remove the cable. Be careful not to touch or damage any other components. Keyboard connector
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 39
    by following the instructions in "Replacing the keyboard cover" on page 29. 20 Turn the notebook over so the bottom is facing up, then replace the keyboard screws removed in Step 8. 21 Replace the memory bay cover and wireless network bay cover. 22 Replace the keyboard screw removed in Step 3. Tip
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 40
    driver - OR - Phillips #0 screwdriver Screws removed during this task: Scribe or non-marring tool 2 black (keyboard cover) 1-3 black (keyboard) To replace the CMOS battery: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the keyboard cover by following the instructions
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 41
    CMOS batteries designed for this Gateway notebook. The non-conductive sleeve and wires are not reusable. 7 Replace the palm rest (if removed) by following the instructions in "Replacing the palm rest" on page 56. 8 Remove the LCD panel (if removed) by following the instructions in "Replacing the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 42
    802.11 wireless card" on page 22. 3 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 4 Open the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. Tip You do not need to unplug the keyboard from the notebook
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 43
    the notebook. Make sure you grasp the connector, not the cable. Retaining clips Connector 6 Lift up on the video cable retaining clips slightly, then slide the video cable out from under the clips. 7 Taking care to note the cables' routing and positions as they are installed from Gateway, pull
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 44
    Replacing Notebook Components 8 Remove the four hinge screws that secure the LCD panel to the notebook. Screws 9 Lift the LCD panel assembly away from the notebook. The LCD panel assembly is now completely detached from the notebook. 10 Place the new LCD panel assembly onto the notebook, then
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 45
    board, then into the wireless card area. 12 Slide the LCD video cable under the retaining clips, then plug the LCD video connector into the notebook. 13 Close the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. 14 Replace the keyboard cover by following the
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 46
    802.11 wireless card" on page 22. 3 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 4 Open the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. Tip You do not need to unplug the keyboard from the notebook
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 47
    www.gateway.com 6 Remove the four or six rubber inserts from the front of the LCD panel assembly. Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert 7 Remove the four or six screws from the front of the LCD panel assembly. Tip On select models, you may be able
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 48
    Replacing Notebook Components 8 Carefully separate the front and back of the LCD panel assembly. Tip If you only removed the bottom two screws in the previous step, separate only the lower half of the LCD panel assembly. 9 Locate the inverter. Depending on LCD panel
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 49
    LCD panel assembly removed in Step 7. 16 Replace the four or six rubber inserts onto the front of the LCD panel assembly. 17 Replace the LCD panel assembly onto the notebook by following the instructions in "Replacing the LCD panel assembly" on page 38. 18 Close the keyboard compartment by following
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 50
    802.11 wireless card" on page 22. 3 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 4 Open the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. Tip You do not need to unplug the keyboard from the notebook
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 51
    www.gateway.com 6 Remove the four or six rubber inserts from the front of the LCD panel assembly. Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert 7 Remove the four or six screws from the front of the LCD panel assembly. Screw Screw Screw Screw Screw
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 52
    Replacing Notebook Components 8 Carefully separate the front and back of the LCD panel assembly. 9 Remove the two screws holding the bracket to the LCD panel assembly, then remove the bracket. Screw Screw 48
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 53
    www.gateway.com 10 Remove the four screws connecting the LCD panel to the LCD panel assembly. Screw Screw 11 Remove the LCD panel from the LCD panel assembly. Screw Screw 49
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 54
    onto the notebook by following the instructions in "Replacing the LCD panel assembly" on page 38. 20 Close the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. 21 Replace the keyboard cover by following the instructions in "Replacing the keyboard cover" on
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 55
    802.11 wireless card" on page 22. 3 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 4 Open the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. Tip You do not need to unplug the keyboard from the notebook
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 56
    Replacing Notebook Components 6 Remove the four or six rubber inserts from the front of the LCD panel assembly. Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert Rubber insert 7 Remove the four or six screws from the front of the LCD panel assembly. Screw Screw Screw
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 57
    www.gateway.com 8 Carefully separate the front and back of the LCD panel assembly. 9 Remove the two screws holding the bracket to the LCD panel assembly, then remove the bracket. Screw Screw 53
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 58
    Replacing Notebook Components 10 Remove the four screws connecting the LCD panel to the LCD panel assembly. Screw Screw 11 Remove the LCD panel from the LCD panel assembly. Screw Screw 12 Place the LCD panel into the new LCD panel assembly lid. 13 Replace the four screws removed in Step 10. 14
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 59
    onto the notebook by following the instructions in "Replacing the LCD panel assembly" on page 38. 19 Close the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. 20 Replace the keyboard cover by following the instructions in "Replacing the keyboard cover" on
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 60
    .11 wireless card" on page 22. 4 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 5 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 6 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 61
    www.gateway.com 8 Lift the black touchpad connector clip, then remove the touchpad cable. Be careful not to touch or damage any other components. 9 Remove the four screws from the top of the palm rest. Screws 57
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 62
    in "Replacing the keyboard cover" on page 29. 17 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 18 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 19 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 63
    .11 wireless card" on page 22. 4 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 5 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 6 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 64
    Replacing Notebook Components 7 Remove the LCD panel by following the instructions in "Replacing the LCD panel assembly" on page 38. 8 Remove the palm rest by following the instructions in "Replacing the palm rest" on page 56. 9 Remove the two screws that secure the modem card to the system board.
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 65
    in "Replacing the keyboard cover" on page 29. 17 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 18 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 19 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 66
    .11 wireless card" on page 22. 4 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 5 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 6 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 67
    in "Replacing the keyboard cover" on page 29. 16 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 17 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 18 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 68
    blade driver - OR - Scribe or non-marring tool Phillips #0 screwdriver Additional materials you may need to complete this task: • X-23-7762 thermal grease Screws removed during this task: 1 black (DVD drive) 2 black (hard drive kit) 1 black (wireless card) Select models only 2 black (keyboard
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 69
    .11 wireless card" on page 22. 7 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 8 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 9 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 70
    in "Replacing the keyboard cover" on page 29. 22 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 23 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 24 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 71
    .11 wireless card" on page 22. 5 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 6 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 7 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 72
    in "Replacing the keyboard cover" on page 29. 18 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 19 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 20 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 73
    .11 wireless card" on page 22. 5 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 6 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 7 Remove the keyboard by following the instructions in "Replacing
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 74
    in "Replacing the keyboard cover" on page 29. 19 Replace the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 20 Replace the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 21 Plug the antenna cables into the IEEE 802.11 wireless
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 75
    .com Copyright © 2006 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 76
    Replacing Notebook Components 72
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 77
  • Gateway ML6227q | 8511725 - Gateway Service Guide - Page 78
    MAN BLADE/OAS SVC GDE R3 12/06
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
®
GATEWAY NOTEBOOK
SERVICE
GUIDE