Gateway ML6227q 8511725 - Gateway Service Guide - Page 59

Close the keyboard compartment by following the instructions

Page 59 highlights

www.gateway.com 15 Press the front and back of the LCD panel together in several places until they click in place. You should find no loose spots or spots where the two halves do not meet. 16 Replace the four or six LCD panel assembly screws. 17 Replace the four or six rubber inserts. 18 Replace the LCD panel assembly onto the notebook by following the instructions in "Replacing the LCD panel assembly" on page 38. 19 Close the keyboard compartment by following the instructions in "Replacing the keyboard" on page 31. 20 Replace the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 21 Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay cover. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

www.gateway.com
55
15
Press the front and back of the LCD panel together in several places until they click in place.
You should find no loose spots or spots where the two halves do not meet.
16
Replace the four or six LCD panel assembly screws.
17
Replace the four or six rubber inserts.
18
Replace the LCD panel assembly onto the notebook by following the instructions in
“Replacing the LCD panel assembly” on page 38
.
19
Close the keyboard compartment by following the instructions in
“Replacing the keyboard”
on page 31
.
20
Replace the keyboard cover by following the instructions in
“Replacing the keyboard cover”
on page 29
.
21
Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.