Gateway ML6227q 8511725 - Gateway Service Guide - Page 25

If your cooling assembly uses thermal grease, remove any thermal grease residue

Get Gateway ML6227q PDF manuals and user guides View all Gateway ML6227q manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

www.gateway.com 4 Remove the old processor from the system board. 5 Install the new processor onto the system board making sure that Pin 1 on the processor (indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on the processor socket (indicated by the absence of a pin hole in the processor socket), then use a flat-blade screwdriver to turn the processor lock screw ¼-turn to ½-turn clockwise. 6 If your cooling assembly uses a thermal pad, go to Step 8. -ORIf your cooling assembly uses thermal grease, remove any thermal grease residue from the cooling assembly using a soft cloth and isopropyl alcohol. 7 Place new thermal grease on the processor. Use only enough to cover the CPU die. 8 Replace the cooling assembly by following the instructions in "Replacing the cooling assembly" on page 14. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
www.gateway.com
21
4
Remove the old processor from the system board.
5
Install the new processor onto the system board making sure that Pin 1 on the processor
(indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on
the processor socket (indicated by the absence of a pin hole in the processor socket), then
use a flat-blade screwdriver to turn the processor lock screw ¼-turn to ½-turn clockwise.
6
If your cooling assembly uses a thermal pad, go to
Step 8
.
-OR-
If your cooling assembly uses thermal grease, remove any thermal grease residue from
the cooling assembly using a soft cloth and isopropyl alcohol.
7
Place new thermal grease on the processor. Use only enough to cover the CPU die.
8
Replace the cooling assembly by following the instructions in
“Replacing the cooling
assembly” on page 14
.