GE GFDS140GDWW Owners Manual - Page 10

About cycle options. NOTE: Not all features are available on all dryer models. Lock You can lock the controls to prevent any selections from being made. You can also lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching pads with this option selected. To lock the dryer, press and hold the lock icon for 3 seconds. To unlock the dryer, press and hold the lock icon for 3 seconds. The Lock icon next to the timer will light up when the controls are locked. Estimated Time Remaining Displays the approximate time remaining until the end of the cycle. As the cycle begins, you will see an initial approximate total cycle time in the display. Then lights will "race" in the display. This means the dryer is continuously monitoring the amount of moisture in the load. The lights will continue until the dryer senses a low level of moisture in the load. At that point, the dryer will calculate and display the approximate time remaining. My Cycle (on some models) To save a favorite cycle, set the desired settings and hold down the My Cycle button for 3 seconds. A beep will sound to indicate the cycle has been saved. To use your custom cycle, press the My Cycle button before drying a load. To change the saved cycle, set the desired settings and hold down the My Cycle button for 3 seconds. About dryer features. Drum Lamp The drum lamp comes on automatically when the door is opened. Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the dryer at the household distribution panel by removing the fuse or switching off the circuit breaker. Reach above dryer opening from inside the drum. Remove the bulb and replace with the same size bulb. 10