GE GFDS140GDWW Owners Manual - Page 26

a Steam Cycle

Page 26 highlights

Before you call for service... PROBLEM Small amount of water on floor in front of dryer Water on floor in back of dryer Water drips from door when opened after a Steam Cycle Cannot see steam at beginning of cycle Cannot see steam at any time during the cycle Garments still wrinkled after steam cycle Dryer continues to tumble after display says 0:00 Possible Causes Inadequate load size for steam cycle selected, excess steam condenses inside cabinet and leaks out Loose water hose connection to valve Hose missing rubber washer at connection with valve Steam condenses on inner door Steam released at different time in cycle The steam nozzle might be clogged with debris from your water supply Too many garments Extended Tumble option was selected What To Do ‡ If using the Steam DeWrinkle cycle, manually reduce cycle time. ‡ Tighten connection. ‡ Install rubber washer provided with hose. ‡ This is normal. ‡ This is normal. ‡ Call 800.GE.CARES to order nozzle replacement kit WE25M71 or to request a service technician to replace this for you. ‡ Load fewer garments; manually increase time. ‡ Ensure Extended Tumble option is not selected. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

26
Before you call for service…
PROBLEM
Possible Causes
What To Do
Small amount of water
Inadequate load size for steam
±
If using the
Steam DeWrinkle
cycle, manually reduce cycle
on floor in front of dryer
cycle selected, excess steam
time.
condenses inside cabinet and
leaks out
Water on floor in back
Loose water hose connection to
±
Tighten connection.
of dryer
valve
Hose missing rubber washer at
±
Install rubber washer provided with hose.
connection with valve
Water drips from door
Steam condenses on inner door
±
This is normal.
when opened after
a Steam Cycle
Cannot see steam at
Steam released at different
±
This is normal.
beginning of cycle
time in cycle
Cannot see steam at any
The steam nozzle might be
±
Call 800.GE.CARES to order nozzle replacement kit WE25M71
time during the cycle
clogged with debris from your
or to request a service technician to replace this for you
.
water supply
Garments still wrinkled
Too many garments
±
Load fewer garments; manually increase time.
after steam cycle
Dryer continues to
Extended Tumble option
±
Ensure
Extended Tumble
option is not selected.
tumble after display
was selected
says 0:00