GE PFSS6PKXSS Use and Care Manual - Page 11

Safety Instructions Operating Instructions Installation Instructions SYSTEM DOOR ALARM BUTTON TONES ENERGY SAVER METRIC Button BACK TIME (SET TIME) UNITS ENGLISH METRIC ICE MAKER COOLING SYSTEM DISPENSER WATER ICEMAKER Button HOME 12:00 PM FREEZER -18 C FRESH FOOD 3C WATER FILTER: GOOD EXTRAS CONVERSIONS NUTRITION FACTS LOCK HOLD 3 SECONDS SETTINGS DISPENSER WATER PHOTOS SUBSTITUTIONS GEAppliances.com SETTINGS (cont.) UNITS To change the temperature readings from English units to Metric units, press the METRIC button. Units shown on the HOME screen will now read in Celsius instead of Fahrenheit. ICEMAKER The unit comes with an icemaker installed. The icemaker rate of 9 cubes per cycle will depend on freezer compartment temperature, room temperature, number of door openings and other use conditions. If the refrigerator is operated before the water connection is made to the icemaker, press and release the ICEMAKER button on the SYSTEM screen to disengage the icemaker. When the refrigerator has been connected to the water supply, press and release the ICEMAKER button on the SYSTEM screen to engage the icemaker. A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes and the ICEMAKER default is ON (check). You will hear a buzzing sound each time the icemaker fills with water. Throw away the first few batches of ice to allow the water line to clear. It is normal for several cubes to be joined together. If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink. NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice. NOTE: Turn OFF the icemaker if the water supply is shut off. SETTINGS DISPENSER WATER REFRIGERATOR WATER FILTER SYSTEM SCREEN SCREEN Button BACK HOME SCREEN SCREEN SAVER DEFAULT BRIGHTNESS BACK ENTER SCREEN Select the SCREEN button from the SETTINGS screen to adjust the BRIGHTNESS of the display and to choose a SCREEN SAVER. For BRIGHTNESS, use the LEFT and RIGHT arrow keys to dim and brighten the screen. For SCREEN SAVER, use the UP and DOWN arrow keys to choose DEFAULT, SLIDE SHOW, BACKGROUND or OFF. DEFAULT gives a slide show of factory pre-loaded pictures at 10-second intervals. These pictures are not viewable in the PHOTOS screen and remain even when all photos are deleted. SLIDE SHOW takes the most recently selected photo among user-uploaded pictures and displays this one first, then the remaining random photos at 10-second intervals for 15 minutes. BACKGROUND takes the most recently selected photo among user-uploaded pictures and displays this as a static image. After 15 minutes of displaying this screen with no activity, the backlight will go OFF. OFF sets no BACKGROUND, SCREEN SAVER or SLIDE SHOW. DISPENSER WATER Set Screen Saver and/or Background Set Brightness of Screen HOME Troubleshooting Tips Consumer Support 11