Gigabyte GA-K8N Pro Sil3512 SATARAID O.S. Installation Manual - Page 11

Step 3: If you want to create RAID array(s), use the arrow keys to select Silicon Image SiI 3x12 SATARaid Controller for Windows XP* (Figure 16) and press ENTER. Then system will begin to load the SATA driver from the floppy disk. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Silicon Image SiI 3x12 SATARaid Controller for Windows XP Silicon Image SiI 3x12 SATARaid Controller for Windows NT 4.0 and 2000 ENTER=Select F3=Exit Figure 16 If you do not want to create RAID, use arrow keys to select Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003* (Figure 17) and press ENTER. Then system will begin to load the SATA driver from the floppy disk. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003 Silicon Image SiI 3x12 SATALink Controller for Windows NT 4.0 and 2000 ENTER=Select F3=Exit Figure 17 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the motherboard driver CD. "*" Select the driver according to which of the following operating systems you want to install: Windows 2003, Windows XP, Windows 2000, or Windows NT4. - 11 - SATA Hard Drive Configurations (Sil3512)