Gigabyte GA-K8N ULTRA-SLI User Manual - Page 49
HT Frequency ratio, CPU Frequency, K8 CPU Clock Ratio
View all Gigabyte GA-K8N ULTRA-SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
English 2-7 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software MB Intelligent Tweaker(M.I.T.) HT Frequency ratio CPU Frequency K8 CPU Clock Ratio Current DDR speed DDR Clock/ Timing Mode CPU/DDR clock Ratio DDR Speed x DDR Timing x CAS# latency (Tcl) x Min RAS# active time (Tras) x RAS# to CAS# delay (Trcd) x Row precharge Time (Trp) x Row to Row delay (Trrd) x Row cycle time (Trc) x Row refresh cyc time (Trfc) x Read-to-Write time (Trwt) x Write Recovery Time (Twr) x Wirite-to-Read Delay (Twtr) x Refresh Rate (Tref) [Auto] [200] [Auto] 266 [Auto] 2/1.33 266 Auto 2.5 6T 3T 3T 2T 9T 10T 4T 2 bus clock 1 bus clock 133MHz, 15.6 us Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help CMOS Setup Utility-Copyright (C) 1984-2005 Award Software MB Intelligent Tweaker(M.I.T.) x Read Preamble value x Async Latency value CPU Spread Spectrum PCIE Clock Robust Graphics Booster CPU Voltage Control Normal CPU Vcore Chipset core PCI-E voltage HT-Link voltage control DDR voltage control 7ns 7ns [Center Spread] [100Mhz] [Auto] [Normal] 1.500V [Normal] [Normal] [Normal] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help Incorrect using these features may cause your system broken. For power end-user use only. HT Frequency ratio Set HT Frequency ratio to 1x, 1.5x, 2x, 2.5x, 3x, 4x, or 5x. (Default: Auto) CPU Frequency 200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz. K8 CPU Clock Ratio This setup option will automatically assign by CPU detection. The option will display "Locked" and read only or will not show up if the CPU ratio is not changeable. - 49 - BIOS Setup