Gigabyte GA-K8N ULTRA-SLI User Manual - Page 76
Completing the RAID BIOS Setup - 9 review
View all Gigabyte GA-K8N ULTRA-SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
English Completing the RAID BIOS Setup After assigning your RAID array disks, press F7. The Clear disk data prompt appears. RAID Mode: Mirroring NVIDIA RAID Utility Nov 5 10 2004 - Define a New Array - Striping Block: Optimal Free Disks Loc Disk Model Name Clear disk daAtrar?ay Disks Loc Disk Model Name [Y[] Y]EASdd [N] N11..O01..MM ST3120026AS ST3120026AS [ ] Del [ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if the drives were previously used as RAID drives. The Array List window appears, where you can review the RAID arrays that you have set up. You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow keys to select the array, then press B to specify the array as bootable. Boot No NVIDIA RAID Utility Nov 5 2004 - Array List - Id Status Vendor Array Model Name 2 Healthy NVIDIA MIRROR 111.79G [Ctrl-X] Exit [ ] Select [B] Set Boot [N] New Array [ENTER] Detail K8 nForce4 SLI Series Motherboard - 76 -